Skip to main content.

Kleer PVC Cement

A cost-effective solution for gluing smaller, shorter length joints such as butt joints and scarf joints, Kleer PVC Cement works best when joints fit tightly together. It can also be used in colder weather where speed is of the essence. Kleer PVC Cement has the longest shelf life in the Kleer family and represents our lowest-cost adhesive per square foot. Application is simple with the attached applicator brush or a roller, and dried films can be reactivated.

Dries quickly to produce a strong yet flexible, waterproof bond that is UV stable to resist yellowing and fading and color matched to Kleer PVC trim products. It provides outstanding resistance to weather and temperature extremes. It can be sanded and painted.

Packaging: 4 oz, 8 oz and 16 oz cans with built-in brush applicators.


  • Wipe both surfaces with a dry cloth to remove dust, dirt and other contaminants.
  • Working quickly, apply a thin, even coat to each surface (covers approximately 200 sq. ft. per gallon). Allow the cement to dry until tacky, about 2-5 minutes.
  • Press surfaces together and hold or clamp for ten minutes. Product can be handled or machined after 10 minute hold time. Full strength bond achieved in 24 hours.
  • Keep container tightly closed when not in use.


FLAMMABLE MIXTURE. Keep away from heat, sparks and open flame. Do not smoke near product. Use adequate ventilation. Avoid prolonged breathing of vapors. If affected, seek fresh air. If swallowed, do not induce vomiting. Call a physician immediately. Avoid contact with eyes, skin and clothing. May cause irritation. If irritation persists, seek medical attention. Keep out of reach of children.

Technical Resources & Data

Technical Drawings & CAD Files

Need More?